Skip to Content
Article
Getting chippy!

Porcelain sink chip repair: Say goodbye to chips and cracks!

Is your porcelain sink chipped and in need of repair? No need to buy a new one, when you can repair what you have with our step-by-step guide.

2 min read

If you have a chipped porcelain sink or cracked ceramic tiles that need repairing, you may well be able to fix them yourself. Read on to learn about different types of damage and which materials you need to carry out the repairs yourself, quickly and inexpensively.

Porcelain sink chip repair: How bad is it?

Knowing what type of damage you are dealing with is the first step to determining if the sink or the tiles can be fixed and which tools you need. Then you can follow some easy steps to repair your ceramic tiles or porcelain sink.  Smaller cracks and chips can almost always be sealed to prevent further damage and water intrusion. For significantly damaged tiles, your best bet is to remove the entire tile and replace with a new one.

Ceramic tile and porcelain sink repair: A how-to guide

Steps to removing tiles

  • Existing grout around tiles must be first removed using a hammer and chisel. Wear safety goggles and gloves to protect your hands and eyes. It is also a good idea to open the bathroom window.
  • Tile removal. Depending on the extent of damage to the tile, you may need to completely remove the ceramic tile with a hammer or chisel and replace it with a new one. If you can save the tile and repair it, first attempt to remove the ceramic tile by carefully prying it away using a chisel, starting with one corner. Continue this process to the other corners and straight edges until it lifts freely.
  • Remove backer and debris so you can apply fresh material under your tile. Providing a clean and level space for your new ceramic tile will allow it to adhere effectively and prevent the tile from lifting. Avoiding gaps under the tile ensures that the tile will not crack or break when pressure is applied.

Steps to repairing tiles

Once the broken tile or chipped piece has been removed, you can bond the pieces together. We will also tell you how to deal with sealing chips and cracks.

  1. Clean and prep the surface. Make sure the entire surface that once held the tile is level, dry, and free of debris and dust.
  2. Bonding. The separate pieces have to fit together perfectly. If not, you will need to replace the entire tile. To bond broken pieces, apply the adhesive and follow the manufacturer’s instructions. Only use a small amount of glue and hold the pieces together immediately after application until a strong bond forms. For small cracks, apply a small amount of glue to the void and wipe away excess glue to prevent further damage.
  3. Wrap up. If you used an applicator, clean it with hot soapy water. The same applies for any spills or dips on the floor.

Steps for inserting tiles

  • Do a test fit. Ensure the new tile fits perfectly by setting it in place before applying mortar. Use a level to make sure the tile sits a bit lower than the surrounding ones; this will account for the addition of mortar below the tile.
  • Mortar application. This is best done by using a trowel. Add a thin layer to the empty space where the tile will go. Apply it to the back of the tile as well for extra adhesion.
  • Insert the tile. Line up all the corners and slowly lower the tile into place. Apply light pressure to push out any air and ensure a tight seal. At this stage you should remove excess mortar, then let it set undisturbed.

The ideal glue for broken ceramic tile

To successfully repair broken ceramic tiles, your adhesive needs to be durable and able to fill gaps. For invisible bonds with a professional finish, go for LePage No More Nails All-Purpose

For all of your sealing needs, grab some LePage 2 in 1 Seal & Bond Kitchen and Bath as an all-around solution since it is specially formulated for kitchens and bathrooms. 

For heavy duty flooring and high traffic areas, a great sealing option is LePage PL Heavy Duty Sealant, which is suitable for tiles and many other surfaces. 

Related Products

  • lepage 2in1 sealandbond cartridge
    LePage 2in1 Kitchen and Bath

    LePage 2 in 1 Seal & Bond Kitchen and Bath Adhesive is a premium adhesive that’s specifically designed for sealing projects in your kitchen and bathroom.

Related Articles

  • 2 min read
    Leather glue: Choosing the best glue and how to use it
  • 2 min read
    Plastic Glue: Fix (Nearly) Everything!
  • 2 min read
    Super Glue: Everything you need to know
  • 2 min read
    Sound Footing: Everything You Should Know About Shoe Glue
  • 2 min read
    FABRIC GLUE: STRONG GLUE FOR CLOTHES AND MORE!
  • 2 min read
    Glass glue: Everything you need to know
  • 2 min read
    5 types of glues for everyday use: Let's stick to the facts
  • 2 min read
    Throwing money down the drain? You need porcelain sink repair!
  • A woman holding the two parts of a broken ceramic cactus, positioning the broken piece in place.
    2 min read
    Ceramic glue and you: Everything you need to know
  • 2 min read
    Polypropylene glue: The must-have adhesive for many DIY projects
  • 2 min read
    Polycarbonate glue: Simply the best adhesive for many DIY projects
  • 2 min read
    All-purpose glue — it’s right for you!