Acrylic sealant to the rescue

Acrylic sealer: What you need to know

Selecting the right acrylic sealer for your DIY job shouldn’t be a challenge. But with so many different sealants available, it can seem like one. This guide is designed to help you find the right acrylic caulk to complete any interior or exterior project. Choosing the right acrylic sealer can save you time and money. Find out how!

What is siliconized acrylic latex caulk?

Acrylic sealers or acrylic latex caulk come in a variety of types. Acrylic sealers are made from acrylic resins (both synthetic and water based) and used for caulking and sealing a variety of cracks and gaps. They are suitable for just about any DIY home project. Acrylic caulk protects your home by preventing the intrusion of dust, water, and insects into your home. The primary characteristic of acrylic sealants: the seal remains flexible, even when you paint it. 

Due to the flexibility of acrylic sealants, it is ideal for filling a variety of building joints. When cured, the acrylic sealer becomes like rubber which allows structures some movement without breaking. One of the best things about acrylic caulk: it can be used on a variety of surfaces, both indoors and out. 

The proper way to work with acrylic sealer

As stated above, acrylic sealers work on many surfaces, as stated above. You can seal any gap both inside and out of your home with confidence using acrylic caulking.

Many home DIY enthusiasts prefer to use acrylic sealers because of their versatility. Acrylic caulk is both odorless  which makes them excellent for grouting, caulking, and joining anything in and out of the home.


Before you begin: All surfaces need to be clean and ready for caulking. All working areas have to be within easy reach and clean. If you are sealing straight lines, you can apply masking tape around the joint to keep the seams straight.

Safety: Using acrylic caulking isn’t a safety hazard, but you do want to make sure you are following proper safety procedures by wearing gloves and safety glasses.

Preparation is key: Cut the tip of the acrylic caulk tube at a 45-degree angle, and then load it into a caulking gun. Make sure to test the acrylic sealer before you begin your project. If you find the sealant isn’t discharged properly, you can always enlarge the hole.

Getting to work: Apply the sealant in the gap you want to seal. You should hold the caulking gun at a roughly 30-degree angle while you slowly pull the trigger. Take your time for even lines.

Finishing: As your DIY project comes to an end, you want to check the acrylic sealer. Dampen your finger and run it along the surface of the sealant to ensure it is smooth. Wipe away any excess sealant and repeat the process.

The best acrylic caulk

Using the right acrylic sealer is crucial. There are many different types of sealants that may make for a challenging decision if you aren’t experienced with acrylic caulking. Fear not, we have you covered! 

Some sealants contain latex and can be used both indoors and out like the LePage QUAD Max Window, Door & Siding Sealant. This acrylic sealer is ideal for closing gaps as it provides superior protection against both moisture and air. This sealant is designed to give you the ultimate seal the first time you apply it. The surface must be dry, and can be cold or hot; it does not matter as this seal will cure and provide you lasting results. 

The best acrylic sealants are resistant to weather, oxygen, and even UV light. LePage 2in1 Seal & Bond Exterior work in any condition. When you need to keep the cold air out and the warm air in, use this acrylic caulk with its superior strength. This sealant does have a slight sheen look when cured, but it is fully paintable with either latex or oil-based paints.